Higher melt - flow rate (MFR), is suitable for extrusion and injection molding, exhibits high transparency with a blue tint, and is thin and glossy.
Widely used in various daily - use items such as food containers, water cups, the glossy cap layer on HIPS sheet, and lampshade.
In 25KG/Small Bag；27MT/CTN.
Unit
Index
Test method
Melt Mass-Flow Rate
g/10min
8.1
Tensile Strength
MPa
Charpy Index Strength
kJ/m2
8.0
Vicat Softening Temperature
℃
89
