• head_banner_01

Manufactur standard Pp Thin-Wall Injection M600e - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo

Short Description:


Product Detail

Related Video

Feedback (2)

To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Polypropylene Injection Molding Process, Biopolymer Cellulose, Pvc Resin S-1300 For Cables, Welcomes all abroad close friends and retailers to ascertain collaboration with us. We are going to give you with genuine, high-quality and successful company to satisfy your requirements.
Manufactur standard Pp Thin-Wall Injection M600e - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo Detail:

Description

PP-PA18D it is belong to PP-R special material. It is hygienic, non-toxic, corrosion-resistant, heat-insulating, energy-saving and light-weight. It can withstand high temperature and high pressure, pipeline water temperature can reach up to 95℃. It also has a long service life, under the specified long-term continuous working pressure,the service life can reach more than 50 years

Application Direction

PP- PA14D is suitable for the production of hot and cold water pipes and direct drinking water pipes to ensure that the water quality is free from secondary pollution. And can be used to transport edible liquids in beverage factories and chemical liquids in chemical plants. It also can be used in the fields of heating on the wall, snow melting device for norther buildings, used be in tubes for solar heating and cooling devices. All kinds of external air conditioner pipes, agricultural sprinkler irrigation pipes, also very suitable for using this materials.

Product Packaging

In net weight of 25kg bag, 15.5-16MT in one 20fcl without pallet or 26-28MT in one 40HQ without pallet or 700kg jumbo bag, 28MT at most in one 40HQ without pallet.

Typical Characteristic

ITEM

UNIT

INDEX

RESULTS

FC-2030

Coloring g/kg ≤10 0 SH/T 1541.1
Big/small pellet g/kg ≤100 21.1 SH/T 1541.1
Yellow color Index g/kg ≤10 0 SH/T 1541.1
Melt mass flow rate(MFR)   g/10min  0.22-0.30 0.26 GB/T 3682.1
Tensile yield stress

Mpa

>21.0 24.0 GB/T 1040.2
Flexural modulus(Ef) Mpa >600 669 GB/T 9341
Charpy notched impact strenth -20℃) KJ/m2 ≥ 1.8 2.2 GB/T 1043.1
Charpy notched impact strenth 23℃)  ≤ 2.0 1.4  HG/T 3862

Product Transportation

Polypropylene resin is a non-hazardous goods.Throwing and using sharp tools like hook is strictly forbidden during transportation.Vehicles should be kept clean and dry. it must not be mixed with sand, crushed metal, coal and glass, or toxic, corrosive or flammable materials in transportation. It is strictly forbidden to be exposed to the sun or rain.

Product Storage

This product should be stored in a well ventilated, dry, clean warehouse with effective fire protection facilities. It should be kept far away from heat sources and direct sunlight. The storage is strictly prohibited in open air. A rule of storage should be followed. The storage period is not more than 12 months since the date of production.


Product detail pictures:

Manufactur standard Pp Thin-Wall Injection M600e - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo detail pictures

Manufactur standard Pp Thin-Wall Injection M600e - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo detail pictures

Manufactur standard Pp Thin-Wall Injection M600e - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo detail pictures

Manufactur standard Pp Thin-Wall Injection M600e - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo detail pictures

Manufactur standard Pp Thin-Wall Injection M600e - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo detail pictures


Related Product Guide:

With our abundant experience and considerate products and services, we have been recognized to be a reputable supplier for a lot of global consumers for Manufactur standard Pp Thin-Wall Injection M600e - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo , The product will supply to all over the world, such as: Cannes, Swansea, Czech republic, As a well educated, innovative and energetic staff,we are responsible for all elements of the research, design, manufacturing, sales and distribution. With studying and developing new techniques,we are not only following but also leading the fashion industry. We listen attentively to the feedback from our customers and provide instant communication. You will instantly feel our expertise and attentive service.
  • This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
    5 Stars By Belinda from New Zealand - 2018.12.10 19:03
    The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
    5 Stars By Mamie from Hamburg - 2018.12.11 14:13