• head_banner_01

OEM Customized Pp Thin-Wall Injection Hpp1850 - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo

Short Description:


Product Detail

Related Video

Feedback (2)

Attaining consumer satisfaction is our company's purpose without end. We will make wonderful endeavours to produce new and top-quality merchandise, satisfy your exclusive requirements and supply you with pre-sale, on-sale and after-sale services for Protein Biopolymer, Bio Plastic Pte Ltd, Bio Polythene, We acquire high-quality as the foundation of our results. Thus, we focus over the manufacture on the finest top quality goods. A strict quality management system has been created to guarantee the caliber of the merchandise.
OEM Customized Pp Thin-Wall Injection Hpp1850 - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo Detail:

Description

PP-PA18D it is belong to PP-R special material. It is hygienic, non-toxic, corrosion-resistant, heat-insulating, energy-saving and light-weight. It can withstand high temperature and high pressure, pipeline water temperature can reach up to 95℃. It also has a long service life, under the specified long-term continuous working pressure,the service life can reach more than 50 years

Application Direction

PP- PA14D is suitable for the production of hot and cold water pipes and direct drinking water pipes to ensure that the water quality is free from secondary pollution. And can be used to transport edible liquids in beverage factories and chemical liquids in chemical plants. It also can be used in the fields of heating on the wall, snow melting device for norther buildings, used be in tubes for solar heating and cooling devices. All kinds of external air conditioner pipes, agricultural sprinkler irrigation pipes, also very suitable for using this materials.

Product Packaging

In net weight of 25kg bag, 15.5-16MT in one 20fcl without pallet or 26-28MT in one 40HQ without pallet or 700kg jumbo bag, 28MT at most in one 40HQ without pallet.

Typical Characteristic

ITEM

UNIT

INDEX

RESULTS

FC-2030

Coloring g/kg ≤10 0 SH/T 1541.1
Big/small pellet g/kg ≤100 21.1 SH/T 1541.1
Yellow color Index g/kg ≤10 0 SH/T 1541.1
Melt mass flow rate(MFR)   g/10min  0.22-0.30 0.26 GB/T 3682.1
Tensile yield stress

Mpa

>21.0 24.0 GB/T 1040.2
Flexural modulus(Ef) Mpa >600 669 GB/T 9341
Charpy notched impact strenth -20℃) KJ/m2 ≥ 1.8 2.2 GB/T 1043.1
Charpy notched impact strenth 23℃)  ≤ 2.0 1.4  HG/T 3862

Product Transportation

Polypropylene resin is a non-hazardous goods.Throwing and using sharp tools like hook is strictly forbidden during transportation.Vehicles should be kept clean and dry. it must not be mixed with sand, crushed metal, coal and glass, or toxic, corrosive or flammable materials in transportation. It is strictly forbidden to be exposed to the sun or rain.

Product Storage

This product should be stored in a well ventilated, dry, clean warehouse with effective fire protection facilities. It should be kept far away from heat sources and direct sunlight. The storage is strictly prohibited in open air. A rule of storage should be followed. The storage period is not more than 12 months since the date of production.


Product detail pictures:

OEM Customized Pp Thin-Wall Injection Hpp1850 - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo detail pictures

OEM Customized Pp Thin-Wall Injection Hpp1850 - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo detail pictures

OEM Customized Pp Thin-Wall Injection Hpp1850 - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo detail pictures

OEM Customized Pp Thin-Wall Injection Hpp1850 - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo detail pictures

OEM Customized Pp Thin-Wall Injection Hpp1850 - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo detail pictures


Related Product Guide:

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for OEM Customized Pp Thin-Wall Injection Hpp1850 - Polypropylene Resin(PP-PA14D) Copolymer pipe Grade MFR(0.2-0.3) – Chemdo , The product will supply to all over the world, such as: Jordan, South Africa, Ukraine, Customer satisfaction is our goal. We are looking forward to cooperating with you and providing our best services to suit your needs. We warmly welcome you to contact us and make sure you feel free to contact us. Browse our online showroom to see what we can do for you. And then E-mail us your specs or inquiries today.
  • The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
    5 Stars By Leona from Wellington - 2018.02.04 14:13
    The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Ray from Grenada - 2017.03.07 13:42