Polyamide 6 chips—commonly known as Nylon 6 chips—are named for the amide linkages (–CO–NH–) present in their macromolecules. Typically appearing as white, cylindrical granules, Nylon 6 chips have a melting point of 210–220°C and a decomposition temperature of approximately 300°C. They are soluble in phenol and hot concentrated sulfuric acid, exhibit excellent electrical insulation properties, and possess good resistance to alkalis and corrosion. Nylon is the most abrasion-resistant of all synthetic fibers.
Textile spinning for clothing, Industrial fiber and Yarn, Co-Extrusion films.
Packaging
In 25kg/bag,26MT/40HQ with pallets
Property
Test Method
Test Conditions
Unit
Test Result
Grade
J2700
Specification
Relative Viscosity (RV)
ISO 307
Requirement: 2.70±0.05
-
2.70
Viscosity Number (VN)
ISO 307
/
-
149.88
Hot-water Extractable Content
ISO 6427
Requirement: ≤0.50
%
0.30
Moisture Content
ISO 15512
Requirement: ≤0.06
%
0.04
Melting Point
ISO 11357
/
℃
220.98
Mechanical Properties
Tensile Strength
ISO 527
20mm/min
MPa
68.5
Tensile Elongation at Break
ISO 527
20mm/min
%
32.5
Bending Strength
ISO 178
5mm/min
MPa
89.33
Bending Modulus
ISO 178
5mm/min
MPa
2019.02
Cantilever Beam Notch Impact Strength
ISO 180
2.75J
kJ/m²
8.16
Impact Strength of Simply Supported Beam Gap
ISO 179
4J
kJ/m²
8.28
Impact Strength of Simply Supported Beam Without Notch
ISO 179
4J
kJ/m²
Not broken
Thermal / Flow Properties
Hot Deformation Temperature
ISO 75-2
1.82MPa
℃
62.80
Melt Index
ISO 1133
230℃, 2160g
g/10min
22.26
Other Properties
Shore Hardness
ISO 868
HD
-
78.00
Note:
It can be used to modify the matrix of materials, and the modified products can be used for injection moulding parts of automobile, electric tools, electronics and electrical appliances, machinery, furniture and toys industries after adding flame retardants, toughening agents and other additives. The above data are measured by the company's laboratory and are only responsible for the sample, which does not represent the specification value of each product.
