Polyamide 6 chips—commonly known as Nylon 6 chips—are named for the amide linkages (–CO–NH–) present in their macromolecules. Typically appearing as white, cylindrical granules, Nylon 6 chips have a melting point of 210–220°C and a decomposition temperature of approximately 300°C. They are soluble in phenol and hot concentrated sulfuric acid, exhibit excellent electrical insulation properties, and possess good resistance to alkalis and corrosion. Nylon is the most abrasion-resistant of all synthetic fibers.
Textile spinning for clothing, Industrial fiber and Yarn, Co-Extrusion films.
Packaging
800Kg Jumbo Bag, 28MT/40HQ
Property
Test Method
Test Conditions
Unit
Test Result
Grade No.
LX245 BRIGHT
Relative viscosity
FZ/T 51004-2011
25℃, 96%H2SO4
/
2.50±0.03
Melt mass-flow rate
GB/T 3682.1-2018
235℃, 2.16kg
g/10min
32.8
Tensile breaking stress
GB/T 1040.1-2022
50mm/min
MPa
67.45
Breaking Elongation
GB/T 1040.1-2022
50mm/min
%
99.95
Flexural strength
GB/T 9341-2008
2mm/min
MPa
89.99
Flexural modulus
GB/T 9341-2008
2mm/min
MPa
2014.10
Izod notched impact strength
GB/T 1843-2008
23℃/5.5J
kJ/m²
3.16
Water content
Q/1500LXJXA001-2023
/
%
0.038
Melting point
Q/1500LXJXA001-2023
Heating rate 10℃/min
℃
226.9
Density
GB/T 1033.1-2008
/
g/cm³
1.165
Disclaimer:
The above figures are typical values for the corresponding series of product, served as reference for customer's selecting products, and the actual values are subject to COA of the product.
